1、 The laser marking machine software system is the core control software of laser equipment, mainly used for inputting and editing marking information, as well as quickly and accurately controlling the laser and galvanometer. Compared to the human brain, when a certain part of the brain is damaged, it becomes uncontrollable.

2、 The CO2 laser marking machine uses CO2 gas as the medium, fills CO2 and other auxiliary gases into a discharge tube, and applies high voltage to the electrode. A glow discharge is generated in the discharge tube, causing the gas to release a 10.64um wavelength laser, which is the key part of generating the laser source and controlling the laser. If the device cannot emit light, it is likely to be a problem with the laser. Depending on the duration of use of the laser equipment, the laser marking machine has a lifespan. The typical CO2 marking machine has a laser emission time of 20000 hours, but it can be refilled and used as usual afterwards If not, return it to the manufacturer for repair.

3、 Everything is normal when turned on, but there is no laser output Observe whether the data cable is properly plugged in and whether the power cord of the laser machine is properly plugged in.

The CO2 laser marking machine is mainly composed of a CO2 laser marking machine, combined with a scanning galvanometer, beam expansion focusing, and marking software system. When the CO2 laser marking machine cannot mark or code, it may be a problem with one of the CO2 laser marking machine, marking software system, or circuit. The above issues have been resolved, and I believe we can proceed with marking normally.